Corny Kegs: Parts & Supplies
There are no products matching your search
View all productsCorny Kegs & Parts: The Ultimate Guide for Homebrewers
If you are a homebrewer, then you know that kegging your beer can save you time and money. Instead of bottling your beer, which can be time-consuming and tedious, you can use Corny kegs to store and dispense your beer. Corny kegs are stainless steel containers that can hold up to 5 gallons of beer, and they are commonly used in the homebrewing community. In this article, we will discuss Corny kegs and parts, and how you can use them to improve your homebrewing experience.
What Are Corny Kegs?
Corny kegs, also known as Cornelius kegs, were originally designed for the soft drink industry in the 1950s. However, they have become popular among homebrewers as a way to store and dispense beer. These kegs are made of stainless steel and come in two sizes: 5-gallon and 2.5-gallon. They are easy to clean and can be reused many times, making them a cost-effective option for homebrewers.
Parts of a Corny Keg
Corny kegs are made up of several parts, including:
-
Lid: The lid is the top of the keg and is typically held in place by a clamp.
-
Posts: The posts are the threaded fittings on the top of the keg that connects to the gas and liquid lines.
-
Dip Tubes: The dip tubes are long metal tubes that extend from the posts to the bottom of the keg. They are used to draw liquid out of the keg.
-
Pressure Relief Valve: The pressure relief valve is located on the lid of the keg and is used to release excess pressure.
-
O-Rings: O-rings are rubber gaskets that seal the lid and posts of the keg to prevent leaks.
Using Corny Kegs
Using Corny kegs is relatively easy, but it does require some equipment. Here is what you will need:
-
Corny Keg: You will need at least one Corny keg to store and dispense your beer.
-
CO2 Tank: A CO2 tank is used to carbonate your beer and dispense it from the keg.
-
Regulator: The regulator attaches to the CO2 tank and controls the pressure of the gas going into the keg.
-
Gas Line: The gas line connects the regulator to the keg and allows CO2 to flow into the keg.
-
Liquid Line: The liquid line connects the keg to the tap and allows the beer to flow out of the keg.
-
Tap: The tap is attached to the end of the liquid line and is used to dispense the beer.
When using Corny kegs, it is important to clean and sanitize them properly before each use. This will prevent off-flavors and contamination in your beer.
Where to Buy Corny Kegs and Parts
If you are interested in using Corny kegs for your homebrewing, there are several places you can buy them. Insidebeer.com is a great source for Corny kegs and parts, as well as other homebrewing equipment. They offer a wide selection of kegs, regulators, taps, and other accessories, and they have competitive prices.
Other sources for Corny kegs and parts include homebrewing supply stores, online retailers, and classified ads. When buying used kegs, it is important to inspect them carefully for damage and to replace any worn or damaged parts.
In conclusion, Corny kegs and parts are essential for beer enthusiasts who want to take their homebrewing to the next level. These kegs offer numerous benefits, such as improved taste, durability, and ease of use. They are also versatile and can be used for storing, transporting, and dispensing various types of beverages. With the right keg and parts, you can enjoy your favorite beers just like the professionals do.
If you're interested in purchasing Corny kegs and parts, there are many options available online or at your local brewing supply store. Insidebeer.com is an excellent resource for beer enthusiasts looking for information and supplies to improve their homebrewing experience. With their vast selection of products and expert advice, you can find everything you need to get started or upgrade your brewing setup. So, grab a cold one and get started on your homebrewing journey today!
FAQ:
Q: What is the difference between a 5-gallon and a 2.5-gallon Corny keg?
A: The main difference is the size and capacity of the kegs. A 5-gallon keg can hold up to 5 gallons of beer, while a 2.5-gallon keg can hold up to 2.5 gallons. The choice between the two depends on the amount of beer you plan to brew and store.
Q: How do I clean and sanitize my Corny kegs?
A: To clean and sanitize your Corny kegs, you can use a solution of hot water and a no-rinse cleaner or a mixture of hot water and sanitizer. Fill the keg with the cleaning solution, close the lid, and shake it vigorously for a few minutes. Then, empty the keg and rinse it with hot water. Repeat the process with the sanitizer solution and let the keg air dry before use.
Q: Can I use Corny kegs to carbonate my beer?
A: Yes, Corny kegs are an excellent option for carbonating your beer. To do so, you need to add priming sugar or force-carbonate the beer with CO2. With the right equipment and technique, you can achieve the desired level of carbonation and enjoy perfectly carbonated beer from your Corny keg.
Q: What kind of CO2 tank do I need for my Corny keg?
A: You will need a CO2 tank that can hold food-grade CO2 and has a regulator that can control the pressure going into the keg. The size of the CO2 tank depends on how often you plan to use it and how many kegs you want to carbonate and dispense. A 5-pound tank is a popular choice for homebrewers.
Q: How do I replace the O-rings on my Corny keg?
A: To replace the O-rings on your Corny keg, you need to remove the old ones and clean the surfaces where the new ones will go. Then, lubricate the O-rings with a food-grade lubricant, such as petroleum jelly, and insert them into their respective grooves. Make sure the O-rings are seated properly and tighten the posts and lid clamp to create a tight seal.
Q: Can I use Corny kegs to dispense other beverages besides beer?
A: Yes, you can use Corny kegs to store and dispense various types of beverages, such as soda, cider, wine, or mead. However, you need to clean and sanitize the kegs thoroughly before and after each use to avoid cross-contamination and off-flavors.
Q: Where can I find replacement parts for my Corny kegs?
A: You can find replacement parts for your Corny kegs at homebrewing supply stores, online retailers, or specialized Corny keg parts stores. The most common parts that need replacement are O-rings, dip tubes, poppets, and pressure relief valves. Make sure to choose the right size and type of parts for your kegs to ensure a proper fit and function.